FinestSupplierAdsorbents, desiccants, catalyst media, specialty chemicals, and process filtration media for technical procurement teams.
RTV-2 LSR Liquid Silicone Rubber Tin Silicone for Candle Molds Making
Agriculture

RTV-2 LSR Liquid Silicone Rubber Tin Silicone for | RFQ Sourcing Details

Agriculture · Quote on request

This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.

Quote on request

Product specs

CategoryActivated Alumina
Unitset
typeof two-parts silicone rubber vulcanized at room temperature. It is mainly used for
ApplicationGTSIL-T Series silicones are good for making molds for resin, polyester, pu, wax, plaster, gypsum, natural and synthetic cement
CategoryAgriculture
CategoryAgriculture
AvailabilityInquiry required
Updated2026-05-27

Buyer's Digest

Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Agriculture. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.

Original product description

GTSIL-Tin cured Series : Tin cure silicone rubber,which is also named condersation silicone rubber,is generally a type of two-parts silicone rubber vulcanized at room temperature.

It is mainly used for model designin work of all kinds of products either with simple or intricate patterns,such as artificial/culutural stones,craft stones,gypsum crafts,GRC/GFRC/GRG for restoration,fireplaces,fountains,ornaments,resin crafts,resin marble works,shoe soles,art sculptures,decorative parts,candles,soaps,PU furniture moldings,etc.

With good resistance to deformation,heat,acid&alkali and expansion,finished silicone molds have very good performance in reproduction process of every fine details on designing models.

Application GTSIL-T Series silicones are good for making molds for resin, polyester, pu, wax, plaster, gypsum, natural and synthetic cement ( artificial stone ),GRC, soap, etc….detailed application like following: Art and decoration: soap, candle, aquarium decoration, crafts molds.

Furniture: concrete ,GFRC furniture, artificial stone molds Architecture: column, fountain molds, architectural restoration . How to use 1.Substrate Preparation The surface of the original should be clean and free of loose material.

If necessary, and in particular with porous substrates, use a suitable release agent such as petroleum jelly or soap solution. 2. Mixing Thoroughly stir Part A (silicone base) before use as filler separation may occur upon prolonged storage.

Weigh 100 gram s P ar t A (silicone base) and 3 gram s P art B (curing agent) in a clean container. Mix together until the curing agent is comple he temperature to exceed 35°C (95°F). Mix suitably small quantities to ensure thorough mixing of the par A (silicone base) and part B (curing agent).

It is strongly recommended that entrapped air be removed in a vacuum chamber, allowing the mix to comple e of air bubbles. A volume increase of 3-5 times will occur on vacuum de-airing the mixture, so a suitably large container should be chosen.

Caution: prolonged vacuum will remove volatile components from the mix and may result in poor thick section cure and non-typical properties. Not

RTV-2 | Applications and Buyer Notes

RTV-2 is organized as a sourcing-ready Agriculture reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time questions befor

Applications

  • Initial shortlist building for related product or supplier options.
  • Specification and application fit review before bulk purchasing.
  • Category, keyword and detail-page comparison before sending an RFQ.

Key specifications

Category
AgricultureBased on visible page data; confirm exact value in the RFQ.
Unit
setBased on visible page data; confirm exact value in the RFQ.
type
of two-parts silicone rubber vulcanized at room temperature. It is mainly used fBased on visible page data; confirm exact value in the RFQ.
Application
GTSIL-T Series silicones are good for making molds for resin, polyester, pu, waxBased on visible page data; confirm exact value in the RFQ.

Buyer tips

  • State quantity range and split-delivery needs before price comparison.
  • Add certification, material or inspection standards when they affect acceptance.
  • For time-sensitive projects, include target arrival date and destination.
  • For special applications, describe operating condition, installation environment and duty cycle.

FAQ

What should buyers confirm first?

Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.

Can buyers inquire when specs are incomplete?

Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.

How should this listing be evaluated?

Check title, category, specifications and related keywords against the actual sourcing requirement.

Source mix: ugc

Key specifications

CategoryActivated Alumina
Unitset
typeof two-parts silicone rubber vulcanized at room temperature. It is mainly used for
ApplicationGTSIL-T Series silicones are good for making molds for resin, polyester, pu, wax, plaster, gypsum, natural and synthetic cement

Product sourcing keywords

These terms come from the title, visible copy and specifications, and link into matching aggregate pages.

Continue from this detail page into sourcing structure

These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.

FinestSupplier related sourcing paths

Related categories FinestSupplier related paths
Related applications FinestSupplier related paths
Related solutions FinestSupplier related paths

FinestSupplier related product samples