Molecular Sieve Adsorbent / Carbon Molecular Siev | RFQ Sourcing Details

. . Model NO.

BY-Molecular Sieve EINECS Shape Sphere, Pellet, Ball Drying Method Static Drying Kind Mineral Desiccant Sorbent Silica Gel Desiccant Chemical Desiccant Density 640-660g/L Compressive Strength 100n/ Granule Min Transport Package 150kg Steel Drum, 25kg Steel Drum, 25kg Carton Box Specification Sphere/Pellet Trademark BY Origin Ningxia, China (Mainland) Production Capacity 300ton/Month Cms 200/220/240 Molecular Sieves is used for purifying raw materials of air separation device The Carbon molecular sieve is a material containing tiny pores of a precise and uniform size that is used as an adsorbent for gases.

When the pressure is high enough, the oxygen molecules, which pass through the pores of CMS much faster than the nitrogen molecules, are adsorbed, while the coming out nitrogen molecules will be enriched in gas phase. The enriched oxygen air, adsorbed by the CMS, will be released by reducing the pressure.

Then the CMS is regenerated and ready for another cycle of producing nitrogen enriched air. Physical properties Diameter of the CMS granule: 1.5mm Period of adsorption: 120S Bulk density: 640-660g/L Compressive strength: ≥100N/ granule Application 1.Be used to separate air into N 2 and O 2 .

2.Be applied in petroleum chemical, heat treatment,electronic and food preservation industries. Specification Model Carbon Molecular Sieve Shape Pellet Diameter 1.2mm or customized Crushing strength Min.

50N/PC (The test temperature≤20ºC) Bulk density 660-700g/L (The test temperature≤20ºC) Adsorbent time 2*60s (The test temperature≤20ºC) Type Adsorbent pressure (MPa) N2 purity (%) N2 quantity (M3/MT.HT) N2/Air (%) CMS- CMS- CMS- CMS- Hand & Storage Recommendation Molecular Sieve should be handled to avoid generation of dusty conditions at the workplace.

Storage in a dry warehouse is recommended. Open packages should be resealed to prevent contamination and adsorption of water or other gases and vapors. The material in bag-in-box should be used within 12 months,while bag-in-steel drum should be used within 24 months.

Regeneration To achieve good operating performance and long life as much as possible, after a certain period of time use must be regenerated . After correct molecular sieve regeneration , make it get the low attenuation of mechanical properties and adsorption There are two basic approaches: Temperature variation .

Generally used in the preheating gas heating, purge molecular sieve to about 200 º C, and stripping down the adsorbate . Variable pressure . Usually used in the gas phase adsorption process.Maintain a constant temperature adsorbent and by reducing pressure and backing purge inert gas , to remove the adsorbate.