FinestSupplierAdsorbents, desiccants, catalyst media, specialty chemicals, and process filtration media for technical procurement teams.
Activated Alumina Granular Desiccant, 3–5 mm or 4–6 mm
Adsorbents And Desiccants

Activated Alumina Granular Desiccant, 3–5 mm or 4 | RFQ Sourcing Details

Adsorbents And Desiccants · Quote on request

This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.

Quote on request

Product specs

CategoryAdsorbents and Desiccants
Unitset
StorageStore in a c , dry, well-ventilated area
Packaging25 kg bag;approxima
AppearanceWhite beads
Pore volumeAt least 0.45–0.50 cm³/g, depending on grade
Bulk densityAt least 600–650 g/L, depending on grade
Product typeActivated alumina granular adsorbent/desiccant
CategoryAdsorbents And Desiccants
AvailabilityInquiry required
Source date2026-07-20

Buyer's Digest

Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Adsorbents And Desiccants. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.

Original product description

This activated alumina granular adsorbent is offered in 3–5 mm and 4–6 mm particle sizes for industrial drying and adsorption duties. The product is described as white, non-toxic, odorless, and insoluble in water and ethanol.

Listed applications include selective moisture adsorption from gases, vapors, and liquids;air-dryer service;removal of lubricating-oil vapor from contaminated oxygen, hydrogen, and carbon dioxide;water purification;and use as a catalyst or catalyst carrier.

It is also presented for PSA oxygen-plant service, although buyers should confirm operating compatibility for their specific process. The technical table identifies desiccant, catalyst, and complex grades.

Across those grades, listed minimum static adsorption is 17%, alumina content is at least 92%, and qualified-size ratio is at least 98%.

Grade-dependent values include water adsorption of at least 45–50%, BET surface area of at least 250–380 m²/g, pore volume of at least 0.45–0.50 cm³/g, and crushing strength of at least 130–200 N per granule.

Because these values vary by grade, the required grade and its complete specification should be written into the purchase order.

Particle size affects both adsorption capacity and mechanical strength: smaller particles are described as providing higher adsorption capacity but lower strength, which may affect service life.

For water-treatment duties, adsorption may also be influenced by pH, alkalinity, bicarbonate concentration, chloride, and sulfate. Before procurement, confirm the exact grade, particle-size range, test method, sampling plan, and certificate-of-analysis limits.

Buyers should also establish required moisture performance under actual temperature, pressure, flow, and inlet conditions;regeneration parameters;pressure-drop limits;attrition tolerance;and expected replacement interval.

For oxygen-related service, confirm cleanliness, contaminant limits, and suitability for the complete PSA system. Packaging options listed are 25 kg bags and approxima

Activated | Applications and Buyer Notes

Activated is organized as a sourcing-ready Adsorbents And Desiccants reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-ti

Applications

  • Initial shortlist building for related product or supplier options.
  • Specification and application fit review before bulk purchasing.
  • Category, keyword and detail-page comparison before sending an RFQ.

Key specifications

Category
Adsorbents and DesiccantsBased on visible page data; confirm exact value in the RFQ.
Unit
setBased on visible page data; confirm exact value in the RFQ.
Storage
Store in a c , dry, well-ventilated areaBased on visible page data; confirm exact value in the RFQ.
Packaging
25 kg bag;approximaBased on visible page data; confirm exact value in the RFQ.
Appearance
White beadsBased on visible page data; confirm exact value in the RFQ.
Pore volume
At least 0.45–0.50 cm³/g, depending on gradeBased on visible page data; confirm exact value in the RFQ.
Bulk density
At least 600–650 g/L, depending on gradeBased on visible page data; confirm exact value in the RFQ.
Product type
Activated alumina granular adsorbent/desiccantBased on visible page data; confirm exact value in the RFQ.

Buyer tips

  • State quantity range and split-delivery needs before price comparison.
  • Add certification, material or inspection standards when they affect acceptance.
  • For time-sensitive projects, include target arrival date and destination.
  • For special applications, describe operating condition, installation environment and duty cycle.

FAQ

What should buyers confirm first?

Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.

Can buyers inquire when specs are incomplete?

Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.

How should this listing be evaluated?

Check title, category, specifications and related keywords against the actual sourcing requirement.

Source mix: ugc

Key specifications

CategoryAdsorbents and Desiccants
Unitset
StorageStore in a c , dry, well-ventilated area
Packaging25 kg bag;approxima
AppearanceWhite beads
Pore volumeAt least 0.45–0.50 cm³/g, depending on grade
Bulk densityAt least 600–650 g/L, depending on grade
Product typeActivated alumina granular adsorbent/desiccant
Attrition lossNo more than 0.4–0.6%, depending on grade
Alumina contentAt least 92% in the technical table
Available sizes3–5 mm and 4–6 mm
BET surface areaAt least 250–380 m²/g, depending on grade
Chemical formulaAl2O3-nH2O
Water adsorptionAt least 45–50%, depending on grade
Crushing strengthAt least 130–200 N per granule, depending on grade
Static adsorptionAt least 17%
Qualified-size ratioAt least 98%

Product sourcing keywords

These terms come from the title, visible copy and specifications, and link into matching aggregate pages.

Continue from this detail page into sourcing structure

These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.

FinestSupplier related sourcing paths

Related categories FinestSupplier related paths
Related applications FinestSupplier related paths
Related solutions FinestSupplier related paths

FinestSupplier related product samples

Supplier profile

FinestSupplier Imported Supplier Pool
主营:Adsorbents and Desiccants

View full profile >