1.5mm-1.7mm Pellet Synthetic Zeolite 3A Molecular | RFQ Sourcing Details

. Overview Product Parameters Our Advantages Packaging & Shipping Certifications Overview . Model NO.

MS01 Kind Molecular Sieve Desiccant Sorbent Molecular Sieves Desiccant Chemical Desiccant Keyword Zeolite Molecular Sieve Transport Package Drum, Bag, Carton Specification 1.7-2.5mm 3.0-5.0mm 1.6mm 3.2mm Trademark JXKELLEY Origin China Packaging & Delivery Package Size 10.00cm * 10.00cm * 10.00cm Package Gross Weight 2.000kg Products Introduction of 3A Molecular Sieve Molecular Sieve type 3A is an alkali metal alumino-silicate;it is the potassium form of the type A crystal structure.

Type 3A has an effective pore opening of about 3 angstroms (0.3nm). This is large enough to allow in moisture, but excludes molecules such as unsaturated hydrocarbons which can potentially form polymers;and this maximises lifetime when dehydrating such molecules.

Product Parameters Product Parameters Technical Specification of 3A Molecular Sieve Model 3A Color Light gray Nominal pore diameter 3 angstroms Shape Sphere Pellet Diameter (mm) Size ratio up to grade (%) ≥98 ≥98 ≥96 ≥96 Bulk density (g/ml) ≥0.72 ≥0.70 ≥0.66 ≥0.66 Wear ratio (%) ≤0.20 ≤0.20 ≤0.2 ≤0.2 Crushing strength (N) ≥55/piece ≥85/piece ≥30/piece ≥40/piece Static H2O adsorption (%) ≥21 ≥21 ≥21 ≥21 Ethylene adsorption (‰) ≤3.0 ≤3.0 ≤3.0 ≤3.0 Water content (%) ≤1.5 ≤1.5 ≤1.5 ≤1.5 Typical chemical formula 0.4K2O .

0.6. Na2O . Al2O3. 2. SiO2. 4.5 H2O SiO2: Al2O3≈2 Typical application a) Drying of unsaturated hydrocarbons (e.g. ethylene, propylene, butadien) b) Cracked Gas Drying c) Drying of natural gas, if COS minimization is essential, or a minimum co-adsorption of hydrocarbons is required.

d) Drying of highly polar compounds, such as methanol and ethanol e) Drying of liquid alcohol f) Static, (non-regenerative) dehydration of insulating glass units, whether air filled or gas-filled. g) Drying of CNG. Package Carton box;Carton drum;Steel drum MOQ 1 Metric Ton Payment terms T/T;L/C;Pay.

Pal;West Union Warranty a) By National Standard GBT b) Offer lifetime consultation on problems occurred Container 20GP 40GP Sample order Quantity 12MT 24MT < 5kg Delivery time 3 days 5 days Stock available Regeneration of 3A Molecular Sieve Molecular sieve Type 3A can be regenerated by either heating in the case of thermal swing processes;or by lowering the pressure in the case of pressure swing processes.

To remove moisture from a 3A molecular sieve, a temperature of 200-230°C is required. A properly regenerated molecular sieve can give moisture dew points below -100°C. The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process.

Attention To avoid damp and pre-adsorption of organic before running, or must to be reactivated. Our Advantages Packaging & Shipping Jiangxi Kelley Chemical Packing Co., Ltd.